Products Center
Products Center
Provide high-quality production materials to customers
Epodil® 749
Epodil® 749
Epodil® 749
Epodil® 749
Epoxy Curing Agents and Modifiers
Epodil 750 reactive diluent is a technical grade of the diglycidyl ether of 1,4-butanediol. It is a difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It will react completely with curing agents and become part of the final crosslinked polymer network. As a result, maximum viscosity reduction can be obtained with physical and performance properties similar to those obtained with standard unmodified epoxy resins.
Category:Hardener

ADVANTAGES

• Minimal impact on reactivity

• Low volatility

• Best dilution efficiency of difunctional glycidyl ethers


749.jpg

APPLICATIONS

• Electrical potting, casting and encapsulation

• Laminates

• Exposed aggregate

• Flooring


SHELF LIFE

At least 36 months from the date of manufacture in the original sealed container at ambient temperature. Store away from excessive heat and humidity in tightly closed containers.


STORAGE AND HANDLING

Refer to the Safety Data Sheet for Epodil 750 reactive diluent.


TABLE 1: TYPICAL PROPERTIES
AppearanceClear liquid
Color (Gardner)1
Viscosity @ 77°F (25°C) (cP)18
Specific Gravity @ 77°F (25°C)1.10
Flash Point (Setaflash) (°F)>200
Hydrolyzable Chloride (max)0.3
Residual Epichlorohydrin (ppm max)10
Weight per Gallon (lb/gal)9.2-9.3
Moisture Content (% max)0.1
Equivalent Wt/{H}130

Recommended Use Level (phr, EEW=190)

See Table



TABLE 2: SUPPLEMENTARY DATA
Epodil 750 reactive diluent can be used as follows to lower the viscosity of a standard Bisphenol-A liquid epoxy resin (EEW=190) with an initial viscosity of 12,500 cP:
Weight Percent Epodil 750 (%)Viscosity @ 77°F (25°C) (cP)
56,000
103,000
151,400
20850
25600


TABLE 3: EXAMPLE IMPACT OF DILUENT ON A SIMPLE FORMULATED SYSTEM

Evonik recommends that the formulator test reactive diluents in their system for performance. The following data is provided as an example of the impact of the reactive diluent on a simple formulated system. 


SYSTEM:

• BADGE with 12.5 wt% Epodil 750

• Cured with Ancamine® 1618 curing agent at 1:1 stoichiometry


Property 

Without Epodil 750

With Epodil 750
Persoz hardness② at 23ºC (1 day/7day)195/310101/305
Phase 3 dry time③ (h) 7:107:34
Tg④ (1st scan)5147
Gel time⑤ (min)5552


2  BYK Persoz pendulum tester according to ISO 1522 with 10 mil WFT at 23˚C/50% RH

3  6 mil WFT BK Drying time recorder according to ASTM D5895  with 6 mil WFT at 23˚C/50% RH

4  TA Instruments DSC model Q200 first scan data

5  150g mix using TECHNE Gel-timer